CentOS 6.5 下部署企业网站平台Nginx+PHP

交叉编译php5

软件版本:php-5.4.27

依赖库:zlib,libxml2

交叉编译器:arm-hisiv200-linux-gnueabi

  1. 将交叉编译器路径添加到PATH中,
    我的交叉编译器目录为/usr/local/arm-hisiv200-linux/,而交叉编译器在交叉编译器目录的/bin中,在控制台输入

    PATH=$PATH:/usr/local/arm-hisiv200-linux/bin/
    
  2. 首先先交叉编译zlib,进入zlib源码目录。

  3. 执行CC=arm-hisiv200-linux-gnueabi-gcc  ./configure  –shared
     –prefix=ZLIB_PATH(编译成功后的安装路径)
  4. make && make install
  5. 在ZLIB_PATH中会有编译成功后的文件和配置。
  6. 然后交叉编译libxml2,进入libxml2源码目录。
  7. 执行CC=arm-hisiv200-linux-gnueabi-gcc  ./configure
     –host=arm-hisiv200-linux-gnueabi
     –prefix=LIBXML2_PATH(编译成功后的安装路径)
  8. make && make install
  9. 在LIBXML2_PATH中会有编译成功后的文件和配置。
  10. 开始交叉编译php5,进入php5源码目录。
  11. 首先先执行./buildconf  –force,为了防止出现 cp:cannot stat
    ‘sapi/cli/php.1′: No such file or directory
  12. 执行./configure  –host=arm-hisiv200-linux-gnueabi  –enable-shared
     –with-zlib-dir=ZLIB_PATH  –with-libxml-dir=LIBXML2_PATH
     –disable-phar  –with-sqlite  –with-pdo-sqlite  –without-iconv
     –enable-fpm  –prefix=PHP5_PATH
  13. make && make install
  14. 编译好的php程序及配置就在PHP5_PATH中。

CentOS 6.5
下部署企业网站平台Nginx+PHP

交叉编译nginx

软件版本:nginx-1.6.2

依赖源码:pcre,zlib(这里是需要用到它们的源码)

交叉编译器:arm-hisiv200-linux-gnueabi

linux版本:32位ubuntu(这个很重要,主要是使用32位x86系统才能进行编译成功,因为字长不一样)

交叉编译nginx与交叉编译php5不同就是nginx用的是依赖的库的源码,而php5用的是库文件。

  1. 进入nginx-1.6.2源码目录。
  2. 在配置和编译nginx会出现很多错误,我们一个一个解决,首先我使用的configure配置如下:

    #!/bin/bash
    
    CC_PATH=/home/shanlink/Cross_compile/arm-hisiv200-linux/bin/arm-hisiv200-linux-gnueabi-gcc
    CPP_PATH=/home/shanlink/Cross_compile/arm-hisiv200-linux/bin/arm-hisiv200-linux-gnueabi-g++
    INSTALL_PATH=/home/shanlink/Cross_compile/nginx_ccs/
    PCRE_PATH=/home/shanlink/Cross_compile/pcre-8.11/
    ZLIB_PATH=/home/shanlink/Cross_compile/zlib-1.2.3/
    CC_OPTS="-I /home/shanlink/Cross_compile/arm-hisiv200-linux/target/include/"
    
    ./configure --prefix=$INSTALL_PATH --with-zlib=$ZLIB_PATH --with-pcre=$PCRE_PATH --with-cc=$CC_PATH --with-cpp=$CPP_PATH --with-cc-opt=$CC_POTS --with-ld-opt="-L /home/shanlink/Cross_compile/arm-hisiv200-linux/target/lib/"
    
  3. 好的,把以上内容做成一个运行脚本,运行,出现一个错误:

    checking for OS
     + Linux 3.13.0-43-generic x86_64
    checking for C compiler ... found but is not working
    
    ./configure: error: C compiler /home/shanlink/Cross_compile/arm-hisiv200-linux/bin/arm-hisiv200-linux-gnueabi-gcc is not found
    

    解决办法就是:编辑auto/cc/name文件,在文件开头有如下一段,注释掉exit
    1

    if [ "$NGX_PLATFORM" != win32 ]; then
    
        ngx_feature="C compiler"
        ngx_feature_name=
        ngx_feature_run=yes
        ngx_feature_incs=
        ngx_feature_path=
        ngx_feature_libs=
        ngx_feature_test=
        . auto/feature
    
        if [ $ngx_found = no ]; then
            echo
            echo $0: error: C compiler $CC is not found
            echo
            #exit 1        注释掉这一行     
        fi
    
    fi
    
  4. 再次运行我们的配置脚本,这时候出现

    checking for TCP_INFO ... found
    checking for accept4() ... found
    checking for int size ...objs/autotest: 1: objs/autotest: Syntax error: word unexpected (expecting ")")
      bytes
    
    ./configure: error: can not detect int size
    cat: objs/autotest.c: No such file or directory
    

    解决方法:编辑auto/types/sizeof文件,找到

    ngx_test="$CC $CC_TEST_FLAGS $CC_AUX_FLAGS 
              -o $NGX_AUTOTEST $NGX_AUTOTEST.c $NGX_LD_OPT $ngx_feature_libs"
    
    将的$CC改为x86上使用的gcc
    
    ngx_test="gcc $CC_TEST_FLAGS $CC_AUX_FLAGS 
              -o $NGX_AUTOTEST $NGX_AUTOTEST.c $NGX_LD_OPT $ngx_feature_libs"
    
  5. 再次运行我们的配置脚本,这时应该可以顺利配置完成。

  6. 执行make,这时候会出现一个错误

    checking for C compiler default output file name... a.out
    checking for suffix of executables... 
    checking whether we are cross compiling... configure: error: in `/home/shanlink/Cross_compile/pcre-8.11':
    configure: error: cannot run C compiled programs.
    If you meant to cross compile, use `--host'.
    See `config.log' for more details.
    make[1]: *** [/home/shanlink/Cross_compile/pcre-8.11//Makefile] Error 1
    make[1]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.2'
    make: *** [build] Error 2
    

    这个是由于nginx在编译时会同时配置pcre并且进行编译,而由于是交叉编译,pcre的配置时需要添加–host=arm-hisiv200-linux-gnueabi,因为是由nginx自动配置的,所以我们需要手动添加此选项于pcre,然后再make,此选项添加在

    文件:objs/Makefile
    
    找到如下一段:
    /home/shanlink/Cross_compile/pcre-8.11//Makefile:    objs/Makefile
        cd /home/shanlink/Cross_compile/pcre-8.11/ 
        && if [ -f Makefile ]; then $(MAKE) distclean; fi 
        && CC="$(CC)" CFLAGS="-O2 -fomit-frame-pointer -pipe " 
        ./configure --disable-shared 
    
    将
        ./configure --disable-shared 
    改为
        ./configure --disable-shared --host=arm-hisiv200-linux-gnueabi(这个交叉编译器前缀填你们电脑上自己的)
    
  7. 如果遇到一下错误,原因是你们的linux系统是64位的,而arm上一般都是32位的,所以会有这个错误,解决办法就是重新装一个32位的linux系统。

    src/core/ngx_slab.c: In function 'ngx_slab_alloc_locked':
    src/core/ngx_slab.c:209: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:209: error: comparison is always true due to limited range of data type
    src/core/ngx_slab.c:221: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:221: error: comparison is always false due to limited range of data type
    src/core/ngx_slab.c:223: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:223: error: comparison is always true due to limited range of data type
    src/core/ngx_slab.c:253: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:253: error: comparison is always true due to limited range of data type
    src/core/ngx_slab.c:262: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:262: error: comparison is always false due to limited range of data type
    src/core/ngx_slab.c:289: error: left shift count >= width of type
    src/core/ngx_slab.c:292: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:294: error: left shift count >= width of type
    src/core/ngx_slab.c:304: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:376: error: left shift count >= width of type
    src/core/ngx_slab.c: In function 'ngx_slab_free_locked':
    src/core/ngx_slab.c:499: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:499: error: comparison is always false due to limited range of data type
    src/core/ngx_slab.c:552: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:575: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:575: error: comparison is always false due to limited range of data type
    src/core/ngx_slab.c:582: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c: In function 'ngx_slab_alloc_pages':
    src/core/ngx_slab.c:643: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:652: error: integer constant is too large for 'long' type
    src/core/ngx_slab.c:652: error: large integer implicitly truncated to unsigned type
    make[1]: *** [objs/src/core/ngx_slab.o] Error 1
    make[1]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.2'
    make: *** [build] Error 2
    
  8. 这时候继续make,还会出现两个错误,一个是

    src/os/unix/ngx_errno.c: In function 'ngx_strerror':
    src/os/unix/ngx_errno.c:37: error: 'NGX_SYS_NERR' undeclared (first use in this function)
    src/os/unix/ngx_errno.c:37: error: (Each undeclared identifier is reported only once
    src/os/unix/ngx_errno.c:37: error: for each function it appears in.)
    src/os/unix/ngx_errno.c: In function 'ngx_strerror_init':
    src/os/unix/ngx_errno.c:58: error: 'NGX_SYS_NERR' undeclared (first use in this function)
    make[1]: *** [objs/src/os/unix/ngx_errno.o] Error 1
    make[1]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.2'
    make: *** [build] Error 2
    

    解决方法就是打开objs/ngx_auto_config.h,添加

    #ifndef NGX_SYS_NERR
    #define NGX_SYS_NERR    132
    #endif
    

    另一个错误

    objs/src/event/ngx_event_accept.o: In function `ngx_event_accept':
    /home/shanlink/Cross_compile/nginx-1.6.2/src/event/ngx_event_accept.c:64: warning: warning: accept4 is not implemented and will always fail
    objs/src/core/ngx_cycle.o: In function `ngx_init_cycle':
    /home/shanlink/Cross_compile/nginx-1.6.2/src/core/ngx_cycle.c:457: undefined reference to `ngx_shm_free'
    /home/shanlink/Cross_compile/nginx-1.6.2/src/core/ngx_cycle.c:462: undefined reference to `ngx_shm_alloc'
    /home/shanlink/Cross_compile/nginx-1.6.2/src/core/ngx_cycle.c:648: undefined reference to `ngx_shm_free'
    objs/src/event/ngx_event.o: In function `ngx_event_module_init':
    /home/shanlink/Cross_compile/nginx-1.6.2/src/event/ngx_event.c:525: undefined reference to `ngx_shm_alloc'
    collect2: ld returned 1 exit status
    make[1]: *** [objs/nginx] Error 1
    make[1]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.2'
    make: *** [build] Error 2
    shanlink@ubuntu:~/Cross_compile
    

    同样的,我们需要修改objs/ngx_auto_config.h文件,在文件中加入

    #ifndef NGX_HAVE_SYSVSHM
    #define NGX_HAVE_SYSVSHM 1
    #endif
    
  9. 好了,这时候make && make install就应该能编译过去了。

  10. 如果遇到其他编译问题,请参考:

一、安装前准备
# yum -y install gcc gcc-c++ glibc automake autoconf libtool make
# yum -y install libmcrypt-devel mhash-devel libxslt-devel libjpeg
libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2
libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2
bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs
e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl
openssl-devel

交叉编译squid

软件版本:squid-2.7-STABLE9

交叉编译器:arm-hisiv200-linux-gnueabi

系统:澳门新葡亰网址,32位ubuntu

在对squid进行交叉编译时,需要用到x86版本的squid,所以我们要进行两个版本的编译。

  1. 首先编译x86版本的使用配置为

    ./configure --prefix=X86_SQUID_PATH
    
  2. make && make install

  3. 进入到squid源码目录下的src/文件夹,有个cf_gen程序,备份起来,交叉编译时会用到。
  4. 建立一个arm-linux.cache文件,写入

    ac_cv_epoll_works=
    ac_cv_af_unix_large_dgram=
    ac_cv_func_setresuid=
    ac_cv_func_va_copy=
    ac_cv_func___va_copy=
    
  5. 执行

    #!/bin/bash
    
    ./configure --host=arm-hisiv200-linux-gnueabi --prefix=/home/shanlink/Cross_compile/squid_ccs/ --cache-file=arm-linux.cache
    

    这时应该是能够顺利通过的

  6. 执行make,会出现一个错误

    ./cf_gen: cannot execute binary file
    
  7. 将之前备份的x86的cf_gen复制到src/目录下替换arm的

  8. 再次执行make,应该可以顺利通过编译
  9. make install
  10. 完成

二、php-fpm安装
# wget
# tar jxf php-5.5.36.tar.bz2
# cd php-5.5.36
# ./configure –prefix=/usr/local/php
–enable-fpm –with-mcrypt –enable-mbstring –disable-pdo
–with-curl –disable-debug –disable-rpath –enable-inline-optimization

–with-bz2 –with-zlib –enable-sockets –enable-sysvsem
–enable-sysvshm
–enable-pcntl –enable-mbregex –with-mhash –enable-zip
–with-pcre-regex
–with-mysql –with-mysqli –with-gd –with-jpeg-dir
# make && make install

配置php-fpm运行用户
# useradd www -M

# cd /usr/local/php/
# cp etc/php-fpm.default etc/php-fpm.conf
# vi etc/php-fpm.conf
修改
user = www
group = www

三、编译安装nginx

# yum install -y gcc gcc-c++ automake autoconf libtool make

1、安装插件安装包
首先需要安装pcre库,然后再安装Nginx:
#安装pcre支持rewrite库,也可以安装源码,注*安装源码时,指定pcre路径为解压源码的路径,而不是编译后的路径,否则会报错
(make[1]: *** [/usr/local/pcre/Makefile] Error 127 错误)
# yum -y install pcre-devel pcre zlib zlib-devel openssl
openssl-devel或
源码安装PCRE(pcre支持rewrite库)
# cd /usr/local/src ;wget
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.bz2
;tar jxf pcre-8.37.tar.bz2 ;cd pcre-8.37 && ./configure
–prefix=/usr/local/pcre && make && make install
源码安装zlib库(zlib支持gzip压缩)

# cd /usr/local/src ;wget ;tar zxf
zlib-1.2.8.tar.gz ;cd zlib-1.2.8 && ./configure –prefix=/usr/local/zlib
&& make && make install
安装ssl(某些vps默认没装ssl)

# cd /usr/local/src ;wget
;tar zxf
openssl-1.0.2d.tar.gz

2、安装Nginx

# cd /usr/local/src ;wget -c
;tar -zxf
nginx-1.8.1.tar.gz ;cd nginx-1.8.1
#进入解压目录,然后sed修改Nginx版本信息为WS
sed -i -e ‘s/1.8.1/g’ -e ‘s/nginx//WS/g’ -e ‘s/”NGINX”/”WS”/g’
src/core/nginx.h
预编译Nginx
# useradd www ;./configure –prefix=/usr/local/nginx
–user=www
–group=www

–with-http_stub_status_module
–with-http_ssl_module
–with-pcre=/usr/local/src/pcre-8.37
–with-zlib=/usr/local/src/zlib-1.2.8
–with-openssl=/usr/local/src/openssl-1.0.2d
注意:
–with-pcre=/usr/local/src/pcre-8.37 指的是pcre-8.37 的源码路径。
–with-zlib=/usr/local/src/zlib-1.2.8 指的是zlib-1.2.8 的源码路径。
# make && make install

自此Nginx安装完毕

四、修改nginx.conf 文件,以支持php-fpm
# cd /usr/local/nginx/
# cp conf/nginx.conf conf/nginx.conf.bak
# vi conf/nginx.conf

其中server段增加如下配置,注意标红内容配置,否则会出现No input file
specified.错误
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
location ~ .php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}

发表评论

电子邮件地址不会被公开。 必填项已用*标注

相关文章

网站地图xml地图